PTC-AF Drill Stand Adapter 43mm Diameter for Argo File Starlight

This is a 43mm diameter adapter compatible with the HiKOKI drill stand D10-DS2 (PTC-AF).
It is designed for the Argofile Starlight handpiece SBH35S.
This is a hobbyist-made item, so please use it if you like.

[Set Contents]
Adapter for Starlight: 1 pc.
Power cable hook: 3 pcs.
M6 knurled screw: 2 pcs.

- Made with a 3D printer. The filament used is PETG carbon fiber (black).
- Adapter unit: This unit consists of two parts that combine to hold the entire front of the handpiece. Please refer to photos 4-7 for setup instructions.
- The outer diameter is 43mm, so it can be directly attached to the drill stand. (Please remove the 42mm sleeve that comes standard with the D10-DS2 before use. It can also be used with other drill stands if they have a 43mm diameter.)
- Bit can be attached/detached while the adapter is set on the drill stand.
- Includes hooks to secure the power cable. Please refer to photos 8-10 for usage instructions. (Photo 9: The hook also serves as a fixing screw for the slide stopper, so there is a gap between the hook and the stopper. If you want to maintain a constant hook angle, please adjust with a spacer or similar item.)
- Please check the photos for other specifications and conditions.
- Only the adapter set shown in photo 3 will be sent. The drill stand D10-DS2 and Starlight are not included. Please purchase them separately.
- The photos are for demonstration purposes, and minor changes or improvements may be made.

As this is a 3D printed item, there may be individual differences such as layer marks and localized unevenness. Please refrain from bidding if you are overly sensitive to the appearance.
Returns and support are not available. Please bid with an understanding of these conditions.

■ Also listed elsewhere. Please understand that it may be sold out due to timing.